Jackson Racing Acura Honda Mazda Ford Eaton Supercharger Nosedrive Rebuild Kit

Description

Contact us for more information about th
e custom pulleys we make.
Check out the picture of our custom pulley in this item. Pulley shown is not included in this item purchase. The one pictured may not be the exact one available for this vehicle.
INVENTORY REDUCTION SALE!!!
SALE PRICE
off the 9.95 retail value
for a limited time only... order yours today!
The High Speed Lab Supercharger Shop
Eaton Supercharger Nosedrive Snout Rebuild Kit
What does this item include?
This item includes the same high quality parts we use in our Embree Specialty Machine supercharger rebuild services.
1. Two AC Delco supercharger oil, 4 ounce bottles (2)
2. Permatex anaerobic gasket maker for aluminum flanges, a red sealer (1)
3. Eaton coupler, prepared with installation grease (1)
4. Brand name
Premium
back nosedrive ball bearing (1)
5.
Brand name
Premium
front nosedrive ball bearing (1)
6.
Brand name
Premium
Viton front nosedrive seal with double-seal internal diameter, prepared with installation grease and oil on internal diameter of the lips of the seal. (1)
7. Nosedrive Rotoclip, a quality replacement of original wire retaining clip (1)
8. Plastic Syringe with tubing for oil extraction (1)
9. Needle Bearing Pair, Single-seal* cup-type needle bearings, to install sub-flush below surface of interior housing face that bearings are being pressed into. (2)
[*Optional upgrade available to INA Double-seal needle bearings for additional, message seller to add.]
10. Nosedrive shaft lock-washer flange nut, Zinc-plated (1)
[*Optional upgrade available to a Stainless Steel nut for additional, message seller to add.]
Shipping to USA addresses.
This kit contains the parts and other items needed to complete the supercharger nosedrive assembly rebuild service yourself, along with replacing the housing needle bearings. This item is Quality Control checked. As an informed DIY Do-It-Yourself person, you are purchasing this item to complete the rebuild service yourself. You are making the decision to take upon yourself the responsibility of the successful outcome. If you decide at any point to have a professional perform this service, send it in. The parts for the supercharger nosedrive assembly are correct when this item leaves the shop. Damage that occurs after the point where it is packaged for shipment from us, is completely on the mechanical person performing the rebuild service, whether you or your mechanic. No refunds will be given however, if you run into issues, contact us first because we can help.
These superchargers are in high demand. Not necessarily easy to come by. Our Shop Foreman designed this kit to be the quickest way to put a supercharger you already own back into service, with much of the work performed by you or your mechanic, to help with cost and turnaround time savings. This kit is especially great for automotive repair shops where the mechanic can keep the cost and turnaround time down by completing the less difficult work in his repair facility. This item is a do-it-yourself rebuild kit. It comes with a parts kit to rebuild the Eaton Snout Nosedrive. We also offer a Complete Supercharger Rebuild Kit that includes a ready to install rotor assembly with new rotor coating also available through our eBay store.
Will this fit the vehicle application of the supercharger being serviced?
This kit is applicable for Eaton M45 M62 superchargers used in Jackson Racing supercharger Kits, Sebring supercharger kits, Downing Atlanta supercharger kits, Ford SVT supercharger kits on various 1.6L - 3.0L engine vehicle applications. For complete list of compatible vehicles see compatibility chart.
Please contact us if you need help to make sure your supercharger is this kind. We have friendly, helpful technical people available by email or phone to answer the lingering questions you have. Just ask.
What can be done to confirm this is the right item for the supercharger's vehicle application?
We are happy to help you make sure you order the right part for the job. If you have ANY DOUBTS about this being the one your application needs, please email us before you purchase this item. Include a cellular phone photo of the one you are replacing, for the Shop Foreman to look at. Also, include the year, make, model and trim level to assist in the identification of the vehicle application.
Vehicle Applications:
1994-up Acura Integra GSR B18C1
1994-up Acura Integra Non-VTEC B18B1
1997-up Acura Integra Type R B18C5
1998-91 Honda Civic, CRX Si Only D16A6
1992-95 Honda Civic, Del Sol     D16Z6 / D15B7
1996-98 Honda Civic EX, Del Sol Si D16Y8
1999-00 Honda Civic EX D16Y8
1996-00 Honda Civic CX, DX, LX D16Y7
1997-up Honda CRV B20B4 / B20Z2
1997-up Honda Prelude H22A
1999-up Honda Civic Si B16A2
1990-93 Mazda Miata 1.6L
1994-up Mazda Miata 1.8L
Related Supercharger Kit Manufacturers:
Downing Atlanta Supercharger Kits
Honda Civic Supercharger Kits
Honda Prelude Supercharger Kits
Honda CRV Supercharger Kits
Ford Focus SVT OEM
Jackson Racing Supercharger Kits JR
Mazda Miata MX-5 Supercharger Kits
Sebring Supercharger Kits
If you have any questions, before you buy this kit please contact us because we want to send you the right part the first time.
A few quick emails can make all the difference in the long run.
This will give us the chance to address concerns before we both have invested time and money.
Also, you may have the same question as someone else which we can share by posting answers for others to learn from.
Our ESM supercharger rebuild kits are designed by the Shop Foreman for your Best Chance at Success (TM).
Please contact us to get more details about a supercharger rebuild kit for these or other Eaton Supercharger Models that are not listed here.
And as always, we are here if you decide it might be in your best interest to have a professional supercharger re-manufacturer service it.
Yes, we can rebuild it even if you have started the service yourself.
Try not to tear anything up and package all the parts up carefully.
For this supercharger we offer complete remanufacturing services. Available services include:
Complete Supercharger Rebuild Service (quoted below)
Rotor Coating Service
Complete Supercharger Rebuild Kit, with re-manufactured, timed, rotor assembly with new rotor coating and parts to complete rebuild service.
External Powder Coating Services for the supercharger and other intake component (stock and custom colors available in several surface textures including wrinkle, gloss and hammertone powder coating)
Rescue Repair Services (Repair a tripped threaded hole, removing internal housing bore scarring, etc)
Pulleys in both stock and overdrive diameters
Test, repair and replace bypass valve diaphragm assembly components
Core exchange services, whole supercharger and rotor assembly exchanges, contact us for availability.
And more…
To have a supercharger completely serviced by us, you send your core in for the rebuild. We have a Complete Rebuild Service which you can send your supercharger in to have performed. In this way you avoid a large core charge.
The Complete Rebuild Service for the Eaton M62 supercharger is as follows:
5 Complete Rebuild Service Eaton M45 Gen3 supercharger
9 Precision Thermal Barrier Rotor Coating Service
Estimated return shipping cost for most USA addresses
8 total with shipping
If you decide to send in your nosedrive and have us rebuild it, the nosedrive will be returned with a bottle of supercharger oil, Eaton coupler and sealer for the reinstallation process.
Get started today on your supercharger rebuild service, knowing you have choices to fit your budget, time frame, mechanical skill level and available shop tools.
We appreciate your business.
The High Speed Lab Supercharger Services